[Table of Contents]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ARSCLIST] Some DAT questions

------Original Message------
From: Tom Fine
Sender: Association for Recorded Sound Discussion List
To: ARSCLIST@xxxxxxxxxxxxxxxx
ReplyTo: Association for Recorded Sound Discussion List
Sent: Jan 18, 2009 8:05 AM
Subject: [ARSCLIST] Some DAT questions

Hello All:

I'd like to tap the collective brain (picture a non-invasive tap, like a Vulcan mind-meld) about 
DATs, with eyes to a medium-sized (several hundred DAT tapes, all dating from the 1990's) transfer 
project. Answers gleaned from personal experience most appreciated.

1. does anyone on-list have experience with "ripping" audio DATs directly to hard drive via a DAT 
data-tape drive? If so, what OS, software and results are you getting? Is there a favored source for 
the appropriate drive?

2. one key reason I was thinking for doing these DATs digital-to-digital would be the real-time 
monitoring, so I could note the locations of any dropouts or glitches. Assuming I'll find some, are 
there any hidden tricks or tips to fixing them or is that audio lost on a damaged segment of tape?

3. if done digital-to-computer, I'm assuming SPDIF, but does anyone have personal experience 
indicating either coax or optical is preferable? I was thinking optical, given the sometimes strange 
grounding issues of a computer.

4. is there anything to be gained by running a simultaneous analog-to-computer? I'm thinking, no, 
but I'm also thinking, I sure don't have all the answers so there may be something unknown to me 

5. once a DAT has been transfered, what is the proper storage method? I was thinking, don't rewind 
it and make sure to store it in its protective case. I was also thinking, if there is a 
label-sticker sheet in the box, take it out since the glue sometimes gets gooey or oily over time.

6. finally, are there any DAT brands/types with known sticky-shed problems? Most of these DATs are 
BASF, but some are Ampex branded. I am not at all sure that Ampex manufactured its own DATs, they 
may have resold Japanese tape.

Thanks in advance for any tips/advice gleaned from personal experiences.

-- Tom Fine

Sent from my Verizon Wireless BlackBerry

[Subject index] [Index for current month] [Table of Contents]