[Table of Contents]


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ARSCLIST] Steel shelving



I've used the particle-board solution from Home Despot (and even Target when they have them)...but I always add a vertical support reinforcement between shelves at about 12-inch intervals; usually a piece of 'furring strip' or 1 x 1, in a straight line between shelves, all the way to the bottom. Really stiffens them up.

Mark Durenberger, CPBE


----- Original Message ----- From: "Tom Fine" <tflists@xxxxxxxxxxxxxxxxxxx>
To: <ARSCLIST@xxxxxxxxxxxxxxxx>
Sent: Thursday, January 31, 2008 7:37 AM
Subject: [ARSCLIST] Steel shelving



I'd like to find a better version of this kind of shelf:
http://tinyurl.com/3xf39d
at a comparably reasonable price.

The Home Depot shelves are OK but they are not always easy to assemble and have plenty of very sharp edges. Does anyone make the old kind of bolt-together shelves anymore? Those took more time to assemble but they seem less prone to stab/cut the user and as more easily reinforced if one wants to exceed specs.

The purpose of these shelves would be to store LPs organized in heavy cardboard boxes and 10" reels of tape. Ideally, I'd like a reasonably heavy steel shelf bottom but I know from experience that these Home Depot particle board bottoms can hold the kind of weight I'd be putting on them, and it's easy enough to cut a replacement from hardwood plywood if needed. The environment is stable indoor USA northeast. The material is not "save from the nuclear blast" archival, just part of my collection. I could make do with the Home Depot option since it's cheap and convenient but if there's a better quality option for a comparable price I'd take it.

-- Tom Fine


__________ Information from ESET NOD32 Antivirus, version of virus signature database 2839 (20080131) __________


The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




[Subject index] [Index for current month] [Table of Contents]