Re: [ARSCLIST] Audio equipment cable shielding

[Mike Richter <mrichter@xxxxxxx>]

Lou Judson wrote:
> You want the shortest run from TT to preamp - no longer than 3 feet. 
> Most turntables have their own cables, don't extend them, mount the 
> preamp close to the TT. It is very low level and high impedance and the 
> capacitance is important too. Keep it short!

If that is inconvenient, consider putting together a simple RIAA preamp 
of your own. There are a couple of circuits (some years old, but parts 
should be available) on the Files page of the CD-R side of my WWW site. 
Either is best run with a battery - no power connection, so no hum from 
that source.

NOTE: If you do have hum, don't forget to isolate it to conductive or 
radiative; they are solved in different ways.

Mike
--
mrichter@xxxxxxx
http://www.mrichter.com/