[Table of Contents]


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ARSCLIST] RIAA EQ software



I not only add eq analog but also equalize further before digitizing. Most classical and non-electronic jazz LPs need help beyond their basic eq. I usually work toward the sound of the piano if there is one, unless it is obviously off-mike (or off-mix, if that is a technical expression.) And, of course, a Steinway sounds different than a Baldwin.

Sometimes using the wrong curve gets one closer to the sought sound when further eq is added.

Electronic music- you're on your own. That includes all rock and most other pops. Even most of the acoustic instruments in such groups are deliberately or casually distorted.

Steve Smolian


----- Original Message ----- From: "Mike Hirst" <mike.hirst@xxxxxxxxxxxxxxxx>
To: <ARSCLIST@xxxxxxxxxxxx>
Sent: Monday, August 25, 2008 5:18 AM
Subject: Re: [ARSCLIST] RIAA EQ software



Audacity

http://audacity.sourceforge.net/

includes predefined equalization settings for the RIAA standard and for several other types of vintage records including:

acoustic
AES
RIAA
EMI 78
NAB
Decca FFRR Micro
Columbia 78
RCA Victor 1938
Columbia LP
Decca FFRR LP
RCA Victor 1947

http://mikehirst.netfirms.com/images/riaa.jpg

These Equalization curves, written by Mitch Golden and Vaughan Johnson are referenced in the O'Reilly reference book 'Digital Audio Essentials' by Bruce and Marty Fries

http://tinyurl.com/BookRef

Which can be bought from Amazon

http://tinyurl.com/DigitalAudioEsentials

and elsewhere.


Scott Phillips wrote:
Does anyone have any suggestions for software to apply the RIAA EQ curve
to a file from a disk transfer ? I have Soundforge 9, and figure I could
dial up the approximate curve, but is there anything specific out there
? Free is always nice, but not a requirement.

Scott Phillips



-- Mike Hirst Managing Director DAS-360° 16 Ocean View Whitley Bay Tyne & Wear NE26 1AL

tel: 0191 289 3186
email: mike.hirst@xxxxxxxxxxxxxxxx
web: http://www.das360.net



[Subject index] [Index for current month] [Table of Contents]