[Table of Contents]


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ARSCLIST] Tube amps



Adobe, with red & green chilis...the hotter the better!
I like that nice orange glow!

Lou



----- Original Message ----- From: "phillip holmes" <insuranceman@xxxxxxxxxx>
To: <ARSCLIST@xxxxxxxxxxxx>
Sent: Monday, April 07, 2008 5:42 PM
Subject: Re: [ARSCLIST] Tube amps



There are many tube amp gurus in Texas. Are you looking for an adobe finish?

Lou Houck wrote:
Who is the tube amp guru in Santa Fe?  I go to Santa Fe
every summer and have a couple of amps that need some
help!  Thanks!

Lou Houck
Rollin' Recording
Boerne, Tx
(just outside of San Antonio)



----- Original Message ----- From: "Scott Phillips" <scottp@xxxxxxxxxxxxxxxxxxx>
To: <ARSCLIST@xxxxxxxxxxxx>
Sent: Monday, April 07, 2008 1:31 PM
Subject: Re: [ARSCLIST] Does anybody know a good place for speaker re-foaming?



Good thing I can repair the tube amps myself, and as long as someone sells me the recone kit, I do the reconing as well. I've done at least a couple hundred over the years. Don't ask, my liver is already trashed enough from sniffing all the solvent fumes from cleaning the speaker baskets...

Scott

-----Original Message-----
From: Association for Recorded Sound Discussion List
[mailto:ARSCLIST@xxxxxxx] On Behalf Of Roger and Allison Kulp
Sent: Monday, April 07, 2008 12:16 PM
To: ARSCLIST@xxxxxxxxxxxxxxxx
Subject: Re: [ARSCLIST] Does anybody know a good place for speaker
re-foaming?

Most mid to large size cities have a high end audio dealer,who can tell
you if your speakers are either good enough to service,or if they are
too far gone for this.Speakers are easy for them.It's tubes and
turntables many of them can't handle,what with the emphasis on home
theatre in the past fifteen years.I have to get somebody who is willing
to drive me from Albuquerque,to Santa Fe when I need work done.Those
tube amps are too heavy to hold on yor lap on a bus.


Roger


Scott Phillips <scottp@xxxxxxxxxxxxxxxxxxx> wrote: I don't even want to
think about that !! The mental image is too disturbing... :>)

-----Original Message-----
From: Association for Recorded Sound Discussion List
[mailto:ARSCLIST@xxxxxxx] On Behalf Of David Lennick
Sent: Monday, April 07, 2008 10:25 AM
To: ARSCLIST@xxxxxxxxxxxxxxxx
Subject: Re: [ARSCLIST] Does anybody know a good place for speaker
re-foaming?

I guess I don't dare tell this group that I've had success with a
band-aid fix involving duct tape....

dl

Malcolm Rockwell wrote:
You might inquire at your local music store. The one that sells high
end rock & roll gear. They'll be able to put you in touch with a good
professional reconing service. Those high wattage speakers take a lot
of abuse and reconing is not unheard of!
Mal Rockwell

*******

Erik Dix wrote:
Hello!

Both of my woofer foam surrounds are shot and I was wondering if
somebody on this list has any recommendations where to get them
refoamed. I believe they are 8" oem dynaudio woofers.

Any help is greatly appreciated.

Erik







--------------------------------- You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost.






--
No virus found in this incoming message.
Checked by AVG. Version: 7.5.519 / Virus Database: 269.22.9/1364 - Release Date: 4/7/2008 6:38 PM




[Subject index] [Index for current month] [Table of Contents]