Hello all,
thought I'd check the collected wisdom of the list for a problem I
thought I knew how to handle, but didn't.
In our archive we've received a number of DAT cassettes from a freelance
journalist. He's used borrowed DAT machines to make reports, but his own
cassettes, and this has led to reports recorded with both 44.1 kHz and
48 kHz sampling frequency on the same cassette.
So, fine, I can record them back into the computer and check the machine
all the time, and switch between two files to record into, when the
frequency changes. I have to create two files, one with each sampling
frequency (I'm using Audition) before I start.
I guess I can also set the computer hardware to use the clock on the
DAT, but is there a way that I can set the software to change frequency
also? I would like to just turn the machine on and let it run, if possible.
Thanks,
Tommy
===
Tommy Sjöberg
The Center for Swedish Folk Music and Jazz Research
Stockholm, Sweden
www.visarkiv.se