Re: [ARSCLIST] 78rpm EQ and postprocessing

[Charles Lawson <clawson@xxxxxxxx>]

Tom Fine wrote:
>
>I'm sure Diamond Cut can be made to work very well, but their own "before
>
>and after" page shows some really disasterous overuse of the software:
>
>http://www.diamondcut.com/BeforeAfter/usersamps.htm

The user samples there are not the best representation of what the software
can do.  There are times when DC6 results surpass those from Cedar, Waves,
Algorithmix and Sony.  (I've tried 'em all.)  The different packages yield
different results on different materials...and user settings are *CRUCIAL.* 
I have been able to use DC6 to get spectacular results where the other
packages have failed and vice versa.  Ya gotta try 'em all to find out which
works best in a particular circumstance.  I almost never use the same
settings twice with any of these packages.  The last successful arrangement
may prove to be only the starting point for the next project.

Patience, patience, patience....

Chas.

--
Charles Lawson <clawson@xxxxxxxx>
Recording/Production/Broadcast Engineer
WETA Radio <http://www.weta.org/fm/>
Washington, DC