[Table of Contents]


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: arsclist cylinder housing design



hi David,

some belated questions about the cylinder housing:
are the polyethylene tube and bottom padding made in a single mold, or glued
together? 
If the latter, are you confident about the durability if the glue?
When closed and upright, will the top padding in the lid touch the top of
the cylinder?
How breathable is the box? Will it trap humidity inside, or converseley,
will it allow humidity in from outside?

It's an attractive design, and reminds me of the excellent 'hatboxes' which
Edison Concert cylinders originally came in. Their main weaknesses were the
felt pads at the bottom of the box, which served as contact points to the
cylinder, attracting moisture and thus mould.  

Regards,

Will  
 

-----Original Message-----
From: David Seubert [mailto:seubert@xxxxxxxxxxxxxxxx]
Sent: 29 March 2002 23:35
To: ARSClist
Cc: bh@xxxxxxxxxxxxxxxx
Subject: arsclist cylinder housing design


We've been working with Metal Edge (an archival supply firm) to design a 
new cylinder housing. It is a square box made of acid free, buffered (ph 
8-10) board with a top and bottom padded with polyethylene foam and a 
polyethylene foam tube to support the cylinder. The tube is shorter than 
the cylinder so you can get your fingers inside to pull out the cylinder as 
with traditional boxes.

Photos of the box are at: http://nico.library.ucsb.edu/cylinderbox/

The outer dimensions are approx 7.5 x 7.5 x 14 cm, the inner dimensions are 
approx 7 x 7 x 12.5 cm. The polyethylene tube is 8 cm tall and 4 cm in 
diameter. This prototype is slightly taller than the final box will be.

We think we've solved most of the problems with other cylinder enclosures 
that have been produced, but we'd appreciate any thoughts on this box or 
improvements that could be made to the design.

Best,
David Seubert, Curator
Performing Arts Collection
Davidson Library Special Collections
University of California
Santa Barbara, CA  93106
(805) 893-5444 Fax (805) 893-5749
mailto:seubert@xxxxxxxxxxxxxxxx
http://www.library.ucsb.edu/speccoll/pa/

-
For subscription instructions, see the ARSC home page
http://www.arsc-audio.org/arsclist.html
Copyright of individual posting is owned by the author of the posting and
permission to re-transmit or publish a post must be secured
from the author of the post.


*********************************************************************
The information contained in this e-mail is confidential and may be 
legally privileged. It is intended for the addressee(s) only. If you 
are not the intended recipient, please delete this e-mail and notify 
the postmaster@xxxxx : The contents of this e-mail must not be 
disclosed or copied without the sender's consent. 

The statements and opinions expressed in this message are those of 
the author and do not necessarily reflect those of the British 
Library. The British Library does not take any responsibility for 
the views of the author. 
*********************************************************************
-
For subscription instructions, see the ARSC home page
http://www.arsc-audio.org/arsclist.html
Copyright of individual posting is owned by the author of the posting and
permission to re-transmit or publish a post must be secured
from the author of the post.


[Subject index] [Index for current month] [Table of Contents]