Adhesive for mounting specimens on glass slides

Can someone recommend an appropriate adhesive for mounting specimens
on glass slides?

The specimens are cast in polyester resin ("Bioplast") and are cut
in cross-section. A liquid adhesive is preferable, for leveling
purposes. Other requirements are that it be: pH-neutral, permanent,
archival and ideally clear (non-opaque). Also, should not be
heat-sensitive (e.g. Meltmount), which creeps over time.

Dorothy Krotzer
Senior Conservator
Fairmount Park Historic Preservation Trust
2020 Chamounix Drive
Philadelphia, PA 19131-3724
215-877-8001
Fax: 215-877-8049


                                  ***
                  Conservation DistList Instance 17:43
               Distributed: Wednesday, November 26, 2003
                       Message Id: cdl-17-43-018
                                  ***