[Table of Contents]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ARSCLIST] Some DAT questions

Based on the answers from this list, plus reading about the somewhat kludged software and hardware involved, I'm thinking I'll stick with real-time dubs. It seems to me that by the time you verify the transfer and solve all the problems to get the transfer in the first place, you're not saving much time. The stuff I have is audio-only, not for picture, so there's no timecode-recovery need.

Thanks for all the tips and ideas. This was an interesting bit of research. I suppose the need is a tiny niche so no software company with the resources to solve all the hardware and software problems, plus provide a great user interface, will leap into it.

-- Tom Fine

----- Original Message ----- From: <Ganesh.Irelan@xxxxxxxx>
To: <ARSCLIST@xxxxxxxxxxxxxxxx>
Sent: Tuesday, January 20, 2009 8:19 AM
Subject: [ARSCLIST] Some DAT questions

1. does anyone on-list have experience with "ripping" audio DATs directly to hard drive via a DAT data-tape drive? If so, what OS, software and results are you getting? Is there a favored source for the appropriate drive?

With the support of someone who has had some success doing this, I tried
three different drives and the latest versions of DATxtract and DAT 2
WAV, all of which were supposed to meet the numerous prerequisites for
such a system, but to date have not succeeded.  Each time we thought we
had gotten all the variables identified and worked out something else
would come up.  The results ranged from astronomical error rates to the
software failing to recognize the drive.  In addition to computer OS,
issues involved are whether the drive is in fact audio capable, the
drive firmware, the DDS version, and the usual interconnect issues.  Be
prepared to deal with a legacy hardware, software, and freeware

Kevin Irelan

[Subject index] [Index for current month] [Table of Contents]