[Table of Contents]


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ARSCLIST] Closet shelving for LP Records



Hi Michael:

This will work very well, especially in a closet:
http://tinyurl.com/y8htmr

Home Depot sells exactly the same thing for the same price.

You can adjust the shelves for efficient storage. Especially if you're also archival boxes or milk crates, these are a great way to keep things organized, and cheap. If you have any doubts about moisture, cover the particleboard shelf surfaces with plastic contact paper. If you have any doubts about strength, replace them with same-sized pieces of hardwood plywood.

YMMV.

-- Tom Fine

----- Original Message ----- From: "michael" <bookpeople@xxxxxxx>
To: <ARSCLIST@xxxxxxxxxxxxxxxx>
Sent: Tuesday, February 05, 2008 3:01 PM
Subject: [ARSCLIST] Closet shelving for LP Records



Hello,

I'm new to the list but just saw a thread a few years back about storage
ideas for for vinyl records, and was wondering if I could solicit some
advice on affordable and proper shelving.

My storage area is a closet with sliding doors, so it doesn't have to be
pretty--I just want proper storage and good access to the records. I
plan to also use this area to store boxed ephemera and other recordings.
The space is about 28" deep, 90" high and 64" wide, so there's room to
work with.

I have several ideas:

I had used storage crates for years (sort of like [1] below), which is
probably the cheapest solution for vinyl, but I abandoned them after
becoming worried that the open design wasn't good for the sleeves. Since
they're so cheap, I'd go back to using them if I knew it was ok for the
records.

Lowes and Home Depot sell this 5-tier industrial chrome shelving [2]
that supports 350lbs per shelf. I like this option because it's cheap,
but the open wire design would require a few mods: some kind of wood top
would have to be cut for each shelf, a small lip put on the back to keep
the records from pushing back against the wall, and a couple of tall
thin lengths of wood would have to be inserted up through the furthest
holes in the wire on each side of the unit to keep the records from
falling out the sides.

I also saw that a company named Gothic Cabinet Craft make a number of
record shelves that would certainly work [3] if stacked, but this is not
as cheap.

Finally, I found a cube system at Staples [4] that's attractive to me
because--just like the old milk crates--the shelving is easy to move and
rearrange and could also function as transport if and when the
collection is ever moved. And these are about $20 each, which isn't too
expensive but a minimal 9-crate solution will already drive the price up
to $200.

Any thoughts on these, or can anyone suggest a better, more affordable
design?

Thanks,

Michael



1. http://www.acehardware.com/product/index.jsp?productId=1277980&cp=2568448.2626073.1303033&view=all&parentPage=family

2. http://www.lowes.com/lowes/lkn?action=productDetail&productId=71034-80752-184874C

3. http://www.gothiccabinetcraft.com/shelf-rack-base-14x30x42-p-2300.html?cPath=2_28

4. http://www.staples.com/webapp/wcs/stores/servlet/StaplesProductDisplay?&langId=-1&storeId=10001&splCatType=2&catalogId=10051&productId=102337&cmArea=ATCH:SC2:CG92:CL162022:SS1008215:SKU|102325|cmS



[Subject index] [Index for current month] [Table of Contents]