[Table of Contents]


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ARSCLIST] can anyone recommend a Studer tech in NYC?



Hi Dave Nolan:

I forgot if I chimed in or not on this. Rod is 100% correct. John French is the man. Drive your machines out to him because first of all his shop is super-cool and an hour spent with John French is an hour spent learning something.. What he can't do on the Studer, he can recommend a good Studer-authorized person to do it. John has done all my headblocks and all my tape decks work well as a direct result of his work. John's not budget-priced but he's worth every penny unless you happen to be a tape deck alignment expert and happen to have an optical alignment system and full machine shop on-premises.

-- Tom Fine

PS -- I know of at least a couple of real hack techs in NYC. Not going to spread ill will in public but be careful out there.

----- Original Message ----- From: "Doug Pomeroy" <pomeroyaudio@xxxxxxxxxxx>
To: <ARSCLIST@xxxxxxxxxxxxxxxx>
Sent: Tuesday, November 07, 2006 6:03 PM
Subject: Re: [ARSCLIST] can anyone recommend a Studer tech in NYC?



Well, Studer still has an office in Nashville, and Technics still
has its headquarters in New Jersey, so what's the problem?
If you want someone in NYC, you can try Analogique, but
I'm not recommending them.

Doug
-------------------------------------------------------------


From: Rod Stephens <savecal@xxxxxxxxxxxxx>
Reply-To: Association for Recorded Sound Discussion List              <ARSCLIST@xxxxxxx>
To: ARSCLIST@xxxxxxxxxxxxxxxx
Subject: Re: [ARSCLIST] can anyone recommend a Studer tech in NYC?
Date: Tue, 23 May 2006 17:28:32 -0700

John French in N.J. has been the major supplier of audio heads for many different kinds of decks including Studers and Technics, but his company, JRF Magnetic Sciences is an authorized parts and service organization, too.

http://www.jrfmagnetics.com/

I've had excellent service from them in the past.

Rod Stephens

Dave Nolan wrote:

Hey there -

Can anyone recommend a maintainence person to service our Studer A-807 and our Technics RS-1500?

Both machines run at 3.75/7.5/15ips and have both 2-track and 1/4-track heads.

Thanks if anyone has someone they could refer to me, I would be eternally grateful :-)

Thanks! -

dave nolan
92nd St. Y
nyc




_________________________________________________________________
Get today's hot entertainment gossip http://movies.msn.com/movies/hotgossip?icid=T002MSN03A07001


[Subject index] [Index for current month] [Table of Contents]