[Table of Contents]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ARSCLIST] Lynx Two Install Question

I seem to recall that my Lynx One card also "hijacked" the playback capability of the former 'default' audio card. I played with the mixer utility and got it to work.

My settings are for the Lynx ONE card, but might be useful:

1. All "faders" UP

2. Click "Monitor" button on 'Analog Out'

3. Select "Digital Out" on the 'Monitor Source' list

Mark Durenberger

----- Original Message ----- From: "Greg Yates" <Greg.Yates@xxxxxxxxxxx>
To: <ARSCLIST@xxxxxxxxxxxxxxxx>
Sent: Wednesday, October 18, 2006 12:21 PM
Subject: [ARSCLIST] Lynx Two Install Question

I had a Lynx Two-A card installed on my computer on Monday afternoon by
our IT people. Since then, I am no longer able to hear any sounds on my
computer, such as when receiving an e-mail, or when trying to watch a
video off of the web.  And, there is no volume Icon in the lower
right-hand corner. When I go into the Control panel, and look at "Sounds
and Audio Devices", it indicates no audio device is installed.  OS is
Windows XP Professional.  Our IT people are stumped as to what is
causing this issue. Basically, I have no audio on the PC itself at all.
Has anyone else run into this problem when installing a Lynx Two?

I have also contatced Lynx about this issue.


Greg Yates
Coordinator of Legislative Recording
Tennessee State Library & Archives
403 Seventh Avenue North
Nashville, TN 37243
Greg.Yates@xxxxxxxxxxx or
Fax, 615-532-5315

[Subject index] [Index for current month] [Table of Contents]