Re: [ARSCLIST] Non-RIAA preamp

To: ARSCLIST@xxxxxxxxxxxx
Subject: Re: [ARSCLIST] Non-RIAA preamp
From: Jeff Brown <jeffbro@xxxxxxxxxxxxxx>
Date: Fri, 8 Sep 2006 11:06:44 -0400
Comments: To: Association for Recorded Sound Discussion List <ARSCLIST@loc.gov>
In-reply-to: <000601c6c9e1$554704a0$6901a8c0@TOMOFFICE>
List-archive: <http://listserv.loc.gov/cgi-bin/wa?LIST=ARSCLIST>
List-help: <http://listserv.loc.gov/cgi-bin/wa?LIST=ARSCLIST>, <mailto:LISTSERV@LISTSERV.LOC.GOV?body=INFO ARSCLIST>
List-owner: <mailto:ARSCLIST-request@LISTSERV.LOC.GOV>
List-subscribe: <mailto:ARSCLIST-subscribe-request@LISTSERV.LOC.GOV>
List-unsubscribe: <mailto:ARSCLIST-unsubscribe-request@LISTSERV.LOC.GOV>
Message-id: <4.3.1.2.20060908105727.00d06100@pop.mindspring.com>
References: <C116913D.22CD5%parker@masterdigital.com> <005401c6c9db$09458690$5892a245@DELLDOWNSTAIRS>
Reply-to: Association for Recorded Sound Discussion List <ARSCLIST@xxxxxxx>

There was a lot of support expressed in this thread for making flat transfers,
then declicking, then applying EQ in software.

But no one addressed the issue of the phase shift correction needed to compensate for the phase shift introduced by the original recording EQ. With an analog phono preamp the required playback phase correction is inherently applied, but I've seen no assurances that the digital EQ in the most commonly used software also applies the needed phase compensation.

Comments, anyone?

Follow-Ups:
- Re: [ARSCLIST] Non-RIAA preamp
  - From: Konrad Strauss
- Re: [ARSCLIST] Non-RIAA preamp
  - From: Rob Poretti

Prev by Date: Re: [ARSCLIST] Mellencamp
Next by Date: Re: [ARSCLIST] Non-RIAA preamp
Previous by thread: [ARSCLIST] Weingartner mystery
Next by thread: Re: [ARSCLIST] Non-RIAA preamp
Index(es):
- Date
- Thread

[Table of Contents]

Re: [ARSCLIST] Non-RIAA preamp

[Subject index] [Index for current month] [Table of Contents]