[Table of Contents]


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ARSCLIST] Quarter-inch splicing tabs



Hi Marie:

You are correct! It was BASF before Emtec was a glint in a beancounter's eye. I have one with a BASF sticker and one with a Gotham sticker over the BASF sticker. Both are running low.

-- Tom Fine

----- Original Message ----- From: "Marie O'Connell" <Marie.OConnell@xxxxxxx>
To: <ARSCLIST@xxxxxxxxxxxxxxxx>
Sent: Friday, March 10, 2006 5:39 PM
Subject: Re: [ARSCLIST] Quarter-inch splicing tabs



I am holding one of those very 1/4 inch splicing dispensers in my hands
now.....BUT, the label has fallen off, so I can't tell you who made them.  I
have a feeling it was EMTEC....but.....my memory fails me.  Otherwise, I use
the blue Quantegy tape and have it on a tape dispenser and just cut off what
I need with a razor blade.  I think the blue is archivally more acceptable
and least sticky than the really handy dispenser one!

Cheers

Marie

Marie O'Connell
Sound Archivist/Audio Engineer/Sound Consultant
The Center For Oral History & Cultural Heritage
The University Of Southern Mississippi
118 College Drive #5175
Hattiesburg, MS, 39401-406
Ph: 601-266-6514
Fax: 601-266-6217


-----Original Message----- From: Association for Recorded Sound Discussion List [mailto:ARSCLIST@xxxxxxx] On Behalf Of Tom Fine Sent: Friday, March 10, 2006 3:45 PM To: ARSCLIST@xxxxxxxxxxxx Subject: [ARSCLIST] Quarter-inch splicing tabs

Does anyone make/sell quarter-inch splicing tabs anymore? I'm talking about
the white tabs you put
over a splice-cut on quarter-inch tape. Back in the tape heyday, places like
Gotham Audio used to
give away tab dispensers at trade shows. I thought I had stockpiled enough,
but no. I much prefer
the tabs to regular blue splicing tape, tabs take much less time to peel and
stick. I think someone
still makes sheets of cassette-splicing tabs, so do the same folks make 1/4"
versions?

-- Tom Fine


[Subject index] [Index for current month] [Table of Contents]