Re: [ARSCLIST] European (DIN, AEG) hubs and flanges needed

[Jos Van Dyck <jos.van.dyck@xxxxx>]

Dear Steve,

That's the German DIN broadcast standard hub, used in many European studios.
[BTW, German is my mother's language, so feel free to ask.]

What tape recorder do you use?

The picture you refer to is for a Revox or Studer machine (PR99, A807,
A810...).
The platters exist in two sizes: 10.5" and 12", depending on the machine.

On a regular Revox, you also need to change the reel hubs, unless they
already have the two additional holes and longer grip to fix the platters.
<http://cgi.ebay.com/_W0QQitemZ7542206030>
<http://i5.ebayimg.com/01/i/04/d3/bd/16_3.JPG>

Any decent Studer or Revox dealer should be able to supply a pair of them
(or a complete set including the hubs).
It may be expensive to ship from Europe.

This store sells a lot of Studer and Revox gear:
<http://stores.ebay.com/filmco>

Jos Van Dyck

NGM Archiving Solutions
Mechelen - Belgium

Steve wrote: 
>
> Just what I need! But, I can't speak German, so I'm not real comfortable
about pursuing this route.  
> http://i18.ebayimg.com/01/i/04/cd/32/14_1_b.JPG
> I was wondering if anyone on this list had any extra of these that I could
purchase or knows of a supplier where I can just BUY what I need.