[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ARSCLIST] Play your 78s anywhere
Or set it up for centre start? Or variable groove pitch? The feed screw
might be driven from the turntable motor.
Very curious.
Bob
-----Original Message-----
From: Association for Recorded Sound Discussion List
[mailto:ARSCLIST@xxxxxxx] On Behalf Of David Lennick
Sent: Wednesday, November 28, 2007 10:37 AM
To: ARSCLIST@xxxxxxxxxxxx
Subject: Re: [ARSCLIST] Play your 78s anywhere
Too bad that one won't run at 78..but I bet someone could modify
it....(or slow
down the source material by the right amount)..
dl
Nelson-Strauss, Brenda wrote:
> And did you catch their "make your own LPs" recorder?:
http://www.vestax.com/v/products/recorders/vrx2000.html
>
> Brenda Nelson-Strauss
>
> -----Original Message-----
> From: Association for Recorded Sound Discussion List
[mailto:ARSCLIST@xxxxxxx] On Behalf Of Robert J Hodge
> Sent: Wednesday, November 28, 2007 9:27 AM
> To: ARSCLIST@xxxxxxxxxxxxxxxx
> Subject: Re: Play your 78s anywhere
>
> Looks O.K., except you'd have to obtain a 3 mil or so stylus for the
> general
> coarse grooved disc.
>
> Bob Hodge
>
>
>
> -----Original Message-----
> From: Association for Recorded Sound Discussion List
> [mailto:ARSCLIST@xxxxxxx] On Behalf Of Marcos Sueiro Bal
> Sent: Wednesday, November 28, 2007 9:02 AM
> To: ARSCLIST@xxxxxxxxxxxx
> Subject: [ARSCLIST] Play your 78s anywhere
>
> The old is new again:
>
> http://www.vestax.com/v/products/active/active.html
>
> Marcos
>
>