Re: [ARSCLIST] InSearchOf: Batch Editor to REVERSE WAV files

[Scott Phillips <scottp@xxxxxxxxxxxxxxxxxxx>]

I tried batch reverse in Sound Forge, it worked nicely... 

-----Original Message-----
From: Association for Recorded Sound Discussion List
[mailto:ARSCLIST@xxxxxxx] On Behalf Of Scott Phillips
Sent: Sunday, December 17, 2006 1:09 PM
To: ARSCLIST@xxxxxxxxxxxxxxxx
Subject: Re: [ARSCLIST] InSearchOf: Batch Editor to REVERSE WAV files

My understanding was the former to allow for one pass digitizing of
stereo 1/4 track 1/4" tape, or similar bi-directionally recorded
materials.

I own the newest version of Sound Forge, but I've never tried batch
reversal, only sample rates and the like. Let me try it and see... If
'John is dead..'

Scott Phillips

-----Original Message-----
From: Association for Recorded Sound Discussion List
[mailto:ARSCLIST@xxxxxxx] On Behalf Of Steven C. Barr(x)
Sent: Saturday, December 16, 2006 8:14 PM
To: ARSCLIST@xxxxxxxxxxxxxxxx
Subject: Re: [ARSCLIST] InSearchOf: Batch Editor to REVERSE WAV files

----- Original Message -----
From: "Tom Fine" <tflists@xxxxxxxxxxxxxxxxxxx>
> Newest Sony Soundforge will do batches, too. I don't have it but I 
> think the
manual is online. I
> know it will do batch sample-rate-conversion, do not know about
batch-reverse.
>
Does this thread relate to playing sound files backwards (which might be
needed if one played a four-track tape on a commercial stereo deck...?)
...or playing it forward but "upside down" (i.e. inverting the wave form
and playing THAT...?!)

Steven C. Barr
(Note that if the former is true, it should be able to settle a number
of controversies per "secret messages" on Beatles LP's...)