[Table of Contents]


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ARSCLIST] TY vs Mitsui. SUmmary



My previously unmade point exactly. I couldn't come up with less than a too-unwordy explanation, but, Joe, your succinctness works perfectly.

So, if I read the tea interleaves correctly, it's one MAM gold, two MAM golds if a backup is required.

The issue of gold DVDs arose. I understood that the chemistry was different from CDs and wonder if the former are effective for long term storage. There being no actual standard for audio DVDs is unsettling as well. Any tests? Looking 25 years into the future, will there be a problem getting them to play back?

Someone wrote to the effect that test results from a manufacturer are only advertising. I admit they are advertising, but perhaps not only. It gives a starting place to confirm, adjust or disprove the science rather than leaving a blank, "I wish we had data" void.

Kodak published their tests rather than the results only. So, if I recall, did Mitsui. TY, on the otherhand, made claims without such publically avaliable back-up. I spoke to them at the time the ealy ads apperared, and was told that, since there were no testing standards, they chose those that made their product look best.

NIST's report on CDs gives much more conservative numbers for CD longevity, even for gold ones, but the gold was vastly superior to everything else. Since they never mention actual manufacturers, it took much deep thought to come up the the winner's brand name in a field of one.

Short of having a reliable server system continually refreshing the data it holds as it circulates among drives, gold CDs are the 44.1 answer. Long term storage of files with higher rates on finite objects is still unsettled, but the feelgood solution seems to be gold DVDs. Until serious testing of the latter, they are feelgood only and should by no means be considered a standard.

Does that express the group's current state of mind on this thread?

Steve Smolian
----- Original Message ----- From: <Joe_Iraci@xxxxxxxxx>
To: <ARSCLIST@xxxxxxxxxxxx>
Sent: Wednesday, April 26, 2006 8:47 AM
Subject: Re: [ARSCLIST] TY vs Mitsui



How much of an error rate difference are we talking about?

For sure, when you burn a disc, you want a low error rate and no E22 and
E32 errors. However, all other things being equal if we are talking about
BLER of 0.5 versus BLER 3.0, this is not an issue.

I have burned a large variety of discs on different burners and different
speeds for the research I have performed. The TY/cyanine does tend to
produce a BLER <1 on many occasions. The Mitsui/MAM can attain this, but
the BLER is usually slightly higher (in the 2 to 3 range).

That being said, gold metal layer will not corrode, silver alloy will.
Phthalocyanine dye is very stable to light, heat, RH and cyanine is not.
These points are not theoretical.

So, as Jerry briefly pointed out as well, here is a basic example:

Disc A (gold metal/phthalocyanine): Initial Bler = 10.0
Disc B (silver metal/cyanine): Initial Bler =0.2

Disc A is very stable and over 10 years does not change. However, Disc B is
less stable and does change over the 10 years due to exposure to one or all
of the following: light, elevated temperature and relative humidity, high
levels of pollutants from the atmosphere, or exposure from aggressive agent
from poor storage enclosures.


After ten years you have:

Disc A (gold metal/phthalocyanine): Ten year Bler = 10.8
Disc B (silver metal/cyanine): Ten year Bler =100.0

Where would you rather be?

Joe


-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.4.6/324 - Release Date: 4/25/2006



[Subject index] [Index for current month] [Table of Contents]