Re: [ARSCLIST] open tape reel inquiry

[Lawrence A Appelbaum <lapp@xxxxxxx>]

Dave,

You and Nigel Champion are wasting your digits posting your answers on
this list. The email instructed that all replies be send directly to
John Sullard: sullard@xxxxxxxx

Larry

>>> audio101@xxxxxxxxxxxxxx 02/18/04 2:28 PM >>>
16mm film reels are about that size. They type used in the camera. Not
exactly obviously but pretty darn close.


Dave

-----Original Message-----
From: Association for Recorded Sound Discussion List
[mailto:ARSCLIST@xxxxxxx] On Behalf Of Lawrence A Appelbaum
Sent: Wednesday, February 18, 2004 1:18 PM
To: ARSCLIST@xxxxxxxxxxxx
Subject: [ARSCLIST] open tape reel inquiry


I'm forwarding the following inquiry. All replies should go directly to
John
Sullard.

Larry
---------
We are currently working on 1cm wide superconducting tape at the
Superconducting Technology Center here at Los Alamos National Lab. We
are
having trouble finding tape reels to archive tape samples ten to twenty
meters long. Here are the dimensions that would be ideal, .4" wide to
.5"
wide between the flanges, 1" to 2" hub diameter, and 3.25" total
diameter of
flanges. Any material would be acceptable, plastic preferred. Do they

make anything like this? Who would be a good vendor for this type of
item?
Any help you can offer is appreciated.

John Sullard
MST-STC
Phone: (505) 663-5592
Fax; (505) 663-5550
sullard@xxxxxxxx